Sheet lead SK125 is single sided & self adhesive. The non adhesive side is tin coated. The product was developed for radiation shielding x-ray and gamma rays. The adhesive was tested with a dose of 100 kGy (10Mrad) which had no adverse effect on the product.
Paints or adhesives can be applied to the tin coated surface if required.
Adhesive |
Cross linked acrylic glue with high contact adhesion and excellent shearing strength at higher temperatures.
The adhesive layer is covered with an impregnated foil.
Cross linked acrylic glue with high contact adhesion and excellent shearing strength at higher temperatures.
The adhesive layer is covered with an impregnated foil.
|
Thickness |
Adhesive Foil covering |
0.090mm
0.075mm
|
|
Contact adhesion
Shearing strength |
|
1,700 N/m
120ks
(1000g/25mm x 25mm)
|
Pull-off force (1800) |
Stainless steel
Painted steel
|
Approx. 1200 N/m (24h)
Approx. 1240 N/m (24h)
|
Thermal Properties |
Min application temperature |
180C |
Min pressing-on force |
On solid surface/ground |
>1 N/25mm2 |
Temperature ranges |
Permanent |
-10 to +120OC |
Sheet lead |
pb content
Standard thicknesses
Thickness tolerance
|
min 99.5 %
0.5, 1.0, 1.5 & 2.0mm
+/- 0.03 to 0.09mm
|
Delivery/packaging |
Delivered on rolled on pasteboard tubes. |
The above specifications are for guidance only and may vary depending on the application. |
When installing this product please be ensuring that vapours from organic solvents do not build up in the work place.
Always ware protective gloves and wash hands when handling lead based products.
|